You’re going to have a Swiss army guitar with a lot of useless combinations... for just because. Maybe you should buy an Esquire or Les Paul Jr.
I have 5 super strats from Ibanez so I'll pass. The TAM and EGEN switchings which I posted are wirings for well respected guitarists of this era, I understand this looks strange and not of a necessity (if one is still listening or playing from a certain era) but modern guitar evolution is a reality and most of us younger people don't bother with the 80s, 90s or even early 2000s blues scale guitar playing.
Anyway thank you for the detailed information you gave me on this thread BluesJam
I'm not gonna tell you to get an Esquire, but I'll say this: go to a guitar store, get an HSH ibanez, a Tele, a LP, and an SSS strat. Plug them all in and try every position for at least 3 minutes. Take notes on what you liked about each one and why and what you'd use them for and whatever. Then make an informed decision about what sounds are essential for you and you need on quick access, and make those the ones available on the 5-way. If you desperately need some other position, then consider adding it to the switch, but I'd recommend giving yourself a week or so to play around with it before you do that, because you'll be able to get a feel for how you use each position and whether you're actually missing anything.
For not telling me to get an Esquire
I grew up with Teles, Strats and Les Paul's. I liked the strats and LP's for different reasons, the hybrid of a strat and les paul together is what I call my HSH Ibanez's.
Thing is, I'm going to make the story short as possible. All guitars of mine have DiMarzios, this new particular guitar is dropped down to drop C. So after trying 3 different models I finally got satisfied with the set I have now.
As I meantioned earlier, bridge is used for solos and rhythm (distortion), middle coil alone for percussive slap riffs (distortion) neck for soloing (distortion)
2 pos (clean) 3 pos (clean) on all HSH guitars. On my HH config I love the 3 pos inner neck and inner bridge. In other words I use ALL positions and really just wanted to see if there was a way to get that HH bridge and neck split in to a HSH config with a rail pickup in the middle.
So last question:
The EGEN wiring I posted which is a HSH config and can coil tap it to use the inner neck and inner bridge. Is it possible to use a rail coil/pickup in the middle ? and split it in pos 2 and 3 when coil tap is off ? Or is it just possible but both rails will be active and not splitted in pos 2 and 3 when coil tap is off ?