[LyonX]

Hi everyone!!! This is my first post! Well, i'm going to change my stratocaster american deluxe's pickups with humbuckers rails, i'm going with Satch track in the neck, fast track 1 middle and Tone Zone S in the bridge. I want that position 2&4 uses one coil of each HH. I also want the tone 1 to work as a master tone for all pickups and the tone 2 to work as a Bass Cut. The other thing I want, is that when I lower the volume pot I won't lose highs. So i did a schematic, i think it should work but i'd like to be sure. If someone has any commentary, suggestion, correction etc... please let me know!

[LyonX]

can't upload the schematics, says uploader full but my pdf its only 9 kb

[LyonX]

http://www.seymourduncan.com/forum/attachment.php?attachmentid=71890&d=1461077941

[darkbluemurder]

That should work.

Good luck,
Stephan