« Reply #20 on: October 07, 2021, 03:04:20 AM »
They are both very strat like. I compared it with a guitar set up for SSS, and to my surprise the #2 and #4 positions are right up with the SSS guitar. Keep in mind that Bluesbucker + Injector neck on my guitar is only #4. No idea how this would work with a Bluesbucker in the bridge but I guess it should be fine.
EDIT: Bluesbucker in the bridge has one problem with the e-type megaswitch as the splitcoil operations in #2 and#3 are predefined and different (#2 uses the neckside coil and #3 the bridgeside coil, which does not work well with a pickup that uses one coil as dummy). In the neck position it is not an issue as both #3 and #4 use the neckside coil of the neck pickup, which is the signal coil in case of a Bluesbucker. You would therefore have to use a 24 pole switch (aka Super Switch) to make this work with the Bluesbucker in the bridge, and the polarity of the pickups must be checked to make sure the combinations are humcancelling.
Cheers Stephan
« Last Edit: October 11, 2021, 03:07:24 AM by darkbluemurder »
Logged
Area 67, Area 58, Area 61, VV Pro 54, Injectors, VV HB2, Virtual Solo, SDS-1, Area T, Area T 615, Virtual Hot T, Chopper T, Bluesbucker, Breed set, Air Norton, Super Distortion, DLX+ set, DLX-90, DP240, DP198, DP168, VPAF b, AT-1, Mo' Joe, FRED, Super 2; GS b