1

The Pickup Place / Re: Liquifire 7 problem!

« on: June 16, 2016, 02:49:12 PM »

did a totally new installation and the same results... i dont know whats wrong . my soldering skills are pretty good , I have 12 guitars and did soldering jobs on 11 of them without problems. this is my only problematic guitar.

2

The Pickup Place / Re: Liquifire 7 problem!

« on: June 03, 2016, 05:26:40 PM »

hello, the diagrams i used were different , here are the links

http://www.dimarzio.com/sites/default/files/diagrams/2h1v1t_1ep1111JPEB2009.pdf

http://www.dimarzio.com/sites/default/files/diagrams/2h1v_1ep1111web.pdf

Its ground noise, if i mute the strings it dissapears but it's more on the liquifire

3

The Pickup Place / Liquifire 7 problem!

« on: June 02, 2016, 06:23:49 PM »

Hello I have an Ibanez RGD2127Z, it was loaded with a D-activator 7 set. I decided to change the D-activator neck for a Liquifire. Installed it using the JP (liquifire + crunchlab) diagram and the liquifire made more noise than the Dactivator bridge, then I used the two humbucker 1 vol and 4pdt diagram and the result was the same. So, is there any particular diagram i have to use? The Liquifire is noisier than the D-activator bridge? the switch EP1111 is the same as the stock ibanez switch?  With the two D-activators the noise was the same on both pickups. Thank you!