DiMarzio Forum
DimarzioForum.Com => The Pickup Place => Topic started by: awjb on November 06, 2016, 03:04:33 AM
-
Hi,
I'm currently running the following rig...
- Peavey Triple X with jj 12ax7's and jj kt77s
- Maxon OD 808 overdrive pedal
- marshall 1960b cab with combination of v30s and t75s
- Halo pt7 with baritone 27" scale, alder body, maple neck, ebony fingerboard Tune-o-matic bridge, with an emg 81-7 pickup in the bridge position.
So I love the highs, upper mids, saturation and articulation that I can get with the current rig, but it needs more beef in the lower end. I suspect the problem might be the pickup combined with the alder body of the guitar. Please correct me if I'm wrong.
Is there a dimarzio pickup (for 7 string) that will reproduce the qualities of the emg 81-7 described above but with more balls in the lower end?
-
Sounds like a D-Sonic 7 is what you need.
-
Could be the amp also. EMG 81s aren't that bass heavy, but you can achieve that heaviness through different amps
-
Thanks for the suggestion. I'll check the D-Sonic 7.
Regarding the amp. I tried a friends guitar and it sounded brutal (although it lacked the clarity I like).
Cheers
-
What guitar/pickups did your friend have?
-
It's an 7 string RG Series Ibazez. I think it's the stock pickups - that's all I know.
Cheers.
-
It's an 7 string RG Series Ibazez. I think it's the stock pickups - that's all I know.
Cheers.
Ok. If you think it sounded great its probably a good idea to get the specific name and guitar model and do some further research. Perhaps its a Dimarzio in it already? Then email Dimarzio Tech about it and ask for a similar pickup with more clarity.
-
Playing thru the Maxon will cut any 'beef' from any pickup you put into it. Which is actually a good thing, so everything stays nice and tight even when downtuning, as you noticed. Put the beef back with the amp's EQ or with a stompbox graphic EQ in the effects loop as a last resort.
-
Hi,
I'm currently running the following rig...
- Peavey Triple X with jj 12ax7's and jj kt77s
- Maxon OD 808 overdrive pedal
- marshall 1960b cab with combination of v30s and t75s
- Halo pt7 with baritone 27" scale, alder body, maple neck, ebony fingerboard Tune-o-matic bridge, with an emg 81-7 pickup in the bridge position.
So I love the highs, upper mids, saturation and articulation that I can get with the current rig, but it needs more beef in the lower end. I suspect the problem might be the pickup combined with the alder body of the guitar. Please correct me if I'm wrong.
Is there a dimarzio pickup (for 7 string) that will reproduce the qualities of the emg 81-7 described above but with more balls in the lower end?
Hello,
I think EMG-81 is tight and great for Djent type of music. About DMZ, apart from other ppl's suggestion, how about the obvious choice : D-activator 7 ?
Also I am deeply interested in the Halo 7-string. Are you satisfied with it? Any pics/reviews? Construction method? Maybe you could open up a thread in Guitar section to present this?
Thanx
-
>>Put the beef back with the amp's EQ or with a stompbox graphic EQ in the effects loop as a last resort.
I'll need to get onto an eq to try out. Thanks for the suggestion.
>>I think EMG-81 is tight and great for Djent type of music. About DMZ, apart from other ppl's suggestion, how about the obvious choice : D-activator 7 ?
I will look into it - thanks.
>>Also I am deeply interested in the Halo 7-string. Are you satisfied with it?
It took some adjustment to my playing as I transitioned from a 25.5" 6 string Jackson Rhoads with a floating schaller trem. Having played it for a while i don't mind it. For my tastes I would have liked several millimetres carved into the body so that the bridge could sit a little lower to give my picking hand a better anchor. Overall I don't mind it.
>>Any pics/reviews?
The best i've got is raw vid footage from a few gigs. For example:
https://video-syd2-1.xx.fbcdn.net/v/t42.1790-2/12343819_774828625955571_1176508264_n.mp4?efg=eyJybHIiOjY5MywicmxhIjoxNTUyLCJ2ZW5jb2RlX3RhZyI6InYzXzQyNl9jcmZfMjNfbWFpbl8zLjBfc2QifQ%3D%3D&rl=693&vabr=385&oh=af0a735752ab8907921b43bed39d5b39&oe=583D66FA
>>Construction method?
I think you would have to contact Halo for the nitty gritty on that. I can only say that it has a bolt on neck. the body seems like a solid slab of alder (the finish is slightly transparent).
I paid around $750 Aus delivered to my door (from San Francisco to Ballarat Aus) so excellent value all things considered.
-
Sorry to hear that about the Halo. My Ibanez 7-string (UV70p) sits almost flush with the body. Got used to it in just a week. But I had some issues with it having to do neck bolts stability. All turned up good. Still the neck-though design (or set-in when done well) can give the maximum access.
-
Problem solved! I had the amp serviced and now it's a beast \m/
Thanks for all the suggestions though.
>>Sorry to hear that about the Halo.
Yeah, I am used to it now for what I have to do.
>>My Ibanez 7-string (UV70p) sits almost flush with the body.
Yeah, I just have a look at one then. Nice.
>>But I had some issues with it having to do neck bolts stability.
Really. I don't know much about ibanez. Still surprising though.
>>Still the neck-though design (or set-in when done well) can give the maximum access.
True.
-
Glad you solved it! And also saved your money :)
-
I was gonna say lol. A XXX with KT77's and an active pickup should be a kick in the chest with every palm-muted downstroke.
Sent from Samsung Galaxy S5 Active using Tapatalk