DiMarzio Forum
DimarzioForum.Com => The Pickup Place => Topic started by: CygnusX1 on July 10, 2016, 11:13:59 PM
-
Super Distortion in the bridge. Humbucker from Hell in the neck. Gibson, Les Paul wired 1950's style.
All I want is to have the neck pup go out of phase when the toggle is in the center position.
I don't want push/pull pots.
Can someone explain what wires go where? Is there a schematic for this somewhere?
I know this may be so simple to some, but I don't want to screw this up! lol
Thanks guys,
-
If the Humbucker from Hell has a four conductor wire, just swap the red and green wires. Does nothing on the neck pickup tone itself but when you select both, you will have the out-of-phase sound. If you don't like it just put it back like it was. It is indeed a simple operation if your neck pickup has a four conductor wire.
Now - if your neck pickup does not have a four conductor wire but a single shielded wire, then the operation is more complicated. In that case we may look at the bridge pickup for a possible out-of-phase solution.
Good luck,
Stephan
-
Thank you, Darkblue. :)